WAE-016-ENC/ WAE-016-PCB

Features

The WAE-016-ENC (3 Series Lift Controller, 16 Floors, 2 Readers, TCP/IP Enabled) is a fully intelligent Ethernet enabled controller based on a 8 bit microprocessor. It is compatible with both the V3.5 Economy and V4 Advanced range of WatchNET 3 Series access controllers .The WAE-016-PCB can by itself control 16 floors with no additional hardware.

WAE-E16-PCB
3 Series Lift module, 16 Floors, 0 Readers, is a plug in module that increases the base 16 floors provided by the WAE-016-PCB controller by another 16 floors. Connecting via a daisy chain ribbon cable, up to 7 WAE-E16-PCB lift modules can be attach to the WAE-016-PCB controller. With each WAE-E16-PCB lift module supporting 16 floors, the WAE-016-PCB lift controller with 7 x WAE-E16-PCB modules can support 128 floors. If only a single module is required to give a total of 32 floors, then this module can be piggybacked on top of the WAE-016-PCB.

WAE-016-PCB Features:
• 32 bit Processor, 2 watch-dogs
• Supports up to 16 floors
• Expandable up to 128 floors with 7 x WAE-E16-PCB Modules
• Supports up to 30,000 cardholders
• Stores up to 100,000 transactions
• Supports Wiegand 24 to 72 bits

Technical Specifications

Controller Specifications:
32 bit ARM processor
2 Watchdogs
30,000 Cardholders
200,000 Transactions
Communication Mode: TCP/IP, RS-485(Option)
Wiegand Reader: 2 pcs
RS485 Reader: 2 pcs (Equal Wiegand)
Operating Voltage: 12V DC (±10%)
Operating Current: ≤800mA
Standby Current: ≤150mA
Working Temperature: -40C ~ 70C/-40F ~ 158F
1 Lithium battery backup (up to 10 years data retention)
Metal case dimensions: 403mm x 384mm x 72mm/15.87” x 15.12 x 2.83”
Weight: 0.2kg / 0.44lb (without metal case)
4.7kg / 10.36lb (with metal case & PSU)

Download

WAE-016-ENC/WAE-016-PCB