WatchNET Access’s WAR-BLU-HITKEYM & WAR-BLU-HITKEY are a mobile smartphone access control ID solutions. Based upon the proven contactless digital radio frequency identification (RFID) platform, the readers interface with a wide range of electronic access control systems by complying with either the legacy Wiegand equipment or the latest bi-directional Open Supervised Device Protocol (OSDP). In addition to traditional proximity credentials, such as clamshell cards and key tags, the platform also offers the option of mobile access credentials loaded on Bluetooth Low Energy (BLE) enabled smartphones. This allows the smartphone to function as a contactless electronic access control credential.

  • Frequency: 125 KHz and 2.4 GHz
  • Read Range:
    Physical Credentials: Up to 4 inches (102mm)
    Mobile Credentials: Up to 15ft (4.6m)
  • Bluetooth Low Energy
    Supports Smart phone
    Mobile Access Credentials
  • Wiegand
    Output Interface
  • Single Reader for Mullion or Wall-Switch Mount
    Metal Door, Window Frames & Flat Surfaces

* OSDP readers are independent models and need to
be appended with the suffix “-OSDP” when ordering

Technical Specifications

Specifications: Mobile-Ready Proximity Reader and Keypad

WAR-BLU-HITKEYM: Mullion-Mount Mobile-Ready Proximity Reader and Keypad
WAR-BLU-HITKEY: Single-Gang Wall Switch Box Mount Mobile-Ready Proximity Reader and Key

  • Technology: Proximity and Bluetooth Low Energy (BLE)
  • Frequency: 125 kHz (proximity) and 2.4 GHz (BLE)
  • Mounting:
    WAR-BLU-HITKEYM: Mullions, including metal door and window frames, as well as flat surfaces
    WAR-BLU-HITKEY: Single-gang wall box, as well as flat surfaces
  • Dimensions:
    WAR-BLU-HITKEYM: 1.78″ W × 6.1″ H × 0.91″ D (45mm × 155mm × 23mm)
    WAR-BLU-HITKEY: 3″ W × 4.6″ H × 0.75″ D (76mm × 117mm × 19mm)
  • OEM Label Area:
    0.9″ W × 0.35″ H (22.86mm × 8.89mm) with corner radius of 0.06″ (1.5mm)
  • Certifications: FCC, ICC, CE
  • IP Code: IP67
  • Voltage: +8 – 14 VDC
  • Current Draw: 60 mA typical, 90 mA peak @ 12 VDC
  • Read Range:
    Physical Credentials: Up to 4 inches (102mm)
    Mobile Credentials: Up to 15 feet (4.6m)
  • Cabling: 24 AWG minimum, multiconductor stranded with an overall foil shield
  • Interface: Wiegand (26-bit and custom formats)
  • Audio Tone – Beeper included standard
  • Operating Temperature: –31°F to 150°F (–35°C to +66°C)
  • Operating Humidity: 0% to 90% relative humidity
  • Indoor & Outdoor Installation: Electronics sealed in weather- and tamper-resistant epoxy potting
  • LED: Four-state standard (red, green, amber, and off)
  • Keypad Output: Either Wiegand or OSDP
  • Technologies Supported:
    WatchNET certain HID® 125-kHz Proximity protocols + certain AWID®
    125-kHz Proximity protocols
    Mobile Access Credentials

1. Optimized for use with devices supporting BLE version 4.2.
2. Self evaluated.
3. Linear power supplies are recommended for best operation.
4. 8-Bit Burst or 26-bit Wiegand standard.
5. WatchNET Mobile Access Credentials are intended to be supported by the current and preceding versions of Apple® iOS and standard compliant
Google Android™ mobile operating software (OS). Custom OS variants may result in a loss of functionality.